Jackery Explorer 1000 Portable Power Station charges eight devices simultaneously. Featuring a battery capacity of 1002Wh, the portable power station is suitable for charging all devices during camping and power outages. Excellent features of the Explorer 1000 power station include three standard pure sine wave AC outlets, compact design, MPPT charge controller, and an industrial-grade quiet power station.
Large Battery Capacity Charging 8 Devices
Equipped with multiple ports, including two USB-C, two USB, three pure sine wave AC outlets, and one DC car port, the portable power station can charge appliances including computers, cameras, CPAP machines, electric grills and more. The Explorer 1000 Portable Power Station offers immense solar power for home emergency backups or RV trips.
Blender (300W)
2.5 H
Space Heater (350W)
2.5 H
Ice Shaver (700W)
1.2 H
Coffee Maker (550W)
1.5 H
Toaster (650W)
1.3 H
Microwave (700W)
1.2 H
Kettle (850W)
1 HRunning Time Simulator
To power with Explorer 1000 (1002Wh Capacity)
Please enter the wattage of the appliance (not exceeding 1000W)
W
0
Hrs
3 Ways to Recharge Easily
3 Ways to Recharge Easily
Up to 5 Years of Battery Life
All-Round Safety with Excellent BMS
All-Round Safety with Excellent BMS
Lightweight and Portable
Robust and Durable
Robust and Durable
Low Carbon Living With Jackery
(2+1) Years Guarantee
(2+1) Years Guarantee
0
Hrs
Recharging Time
0
Wh
Sustainable Energy Saving
PREPARING YOUR SOLAR GENERATOR
The Explorer 1000 can be quickly fully recharged within 8 hours by connecting two SolarSaga 100W solar panels together with an adapter cable (package included).
Solar recharging steps:
1. Find the DC interface on the back of SolarSaga 100W;
2. Connect the DC interfaces of 2*SolarSaga 100W with the Y Parallel Cable;
3. Connect the Y Parallel Cable with the Anderson input of Explorer 1000
Notes:
1. Solar panel types and quantity depends on your purchase.
2. Buy 2 SolarSoga, get 1*Solar Panel Connector.
3. Buy 4 or 6 SolarSoga, get 2*Solar Panel Connectors.
* This product (portable power supply) can supply power to your device in the temperature range of -10 to 40 degrees Celsius (-10 to 65 degrees Celsius for solar panels). If the operating temperature is outside the above range, this product may not work.
A: Please note that the AC output ports can only charge/power devices that operate at less than 1000-Watts, besides, the whole wattage should be under 1000 watts as well . Once exceeding, the Explorer 1000 will shut off automatically. Please refer to your device specification before purchase.
A: Working time = 1002Wh* 0.85 / operating wattage of your device
For reference, assuming power consumption of your device is 60W (might be a box fan), working time will be 1002Wh*0.85/60w=14.2hrs (rough calculated) .
Please note: actual power consumption varies from different usages, please consult Jackery for better purchase decision.
A: The maximum input wattage of Explorer 1000 is 126W(12~30V,7.5~8.33A ). As for recharging time, it depends on which panel you are using and weather conditions, for example, the Explorer 1000 can be quickly recharged within 8 hours by connecting two SolarSaga 100W solar panels together with an adapter cable. If connecting only one single panel, the approximate recharging time is 17 hours. Recharging time may varies from different location, temperature, weather etc, the actual time may be different.
A: The Explorer 1000 is not waterproof. Please do not store them in humid environment for longtime.
More
